Re: weekend saved (was Micro plan problem) also AF4 prog ress.
Jamie,
Ah shucks........and here I have been all this time thinking we
was all Bolgerados.;-)
Oh well,I hope you have a safe and sun-filled season out on
the"wetcoast" Jamie and that your splendily superb Chebacco carries
you and yours to some fine adventures!
Sincerely,
Peter Lenihan,suddenly wishing he was out there in B.C for some real
adventures............
Ah shucks........and here I have been all this time thinking we
was all Bolgerados.;-)
Oh well,I hope you have a safe and sun-filled season out on
the"wetcoast" Jamie and that your splendily superb Chebacco carries
you and yours to some fine adventures!
Sincerely,
Peter Lenihan,suddenly wishing he was out there in B.C for some real
adventures............
--- In bolger@y..., "Orr, Jamie" <jorr@b...> wrote:
> Huh? What's that? Another Bolgerist in BC?
>
> Where are you, Derek? I'm here in Victoria -- anyone on the list is
more
> than welcome if they find themselves in the area -- just drop me a
line. If
> you're anywhere on the road between here and Prince Rupert, send me
your
> address, I'll be driving past this summer.
>
> Jamie Orr
>
> -----Original Message-----
> From: John Bell [mailto:jmbell@m...]
> Sent: Friday, May 18, 2001 3:07 PM
> To: bolger@y...
> Subject: Re: [bolger] weekend saved (was Micro plan problem) also
AF4
> progress.
>
>
> It was no problem, really. The plans were sitting here right next to
the
> computer. Tossing them on the scanner took all of two minutes.
>
> I got the bottom on my AF4 today. There was a brief crisis when I
realized
> that I had not followed the panel nesting exactly and was a little
short of
> 1/2" plywood. I had just about resigned myself that I had to go buy
another
> sheet when it occurred to me that I could make do with what I had by
adding
> an extra butt joint. Whew! Getting the bottom on is a quite a sense
of
> accomplishment.
>
> I do have some business in BC if I can ever get it going. But it
will be in
> the inland parts, around Prince George, Quesnel, and way up north in
Taylor
> and Chetwynd. Have a beer for me anyway.
>
> JB in Kennesaw.
>
>
> ----- Original Message -----
> From: "Dawn and Derek" <dgw@d...>
> To: <bolger@y...>
> Sent: Friday, May 18, 2001 3:05 PM
> Subject: [bolger] weekend saved (was Micro plan problem)
>
>
> Thanks for the rapid responses folks!
>
> Special Thanks to John, for going the extra mile for me :)
>
> Out to the 'shop (with a big grin on my face, warmed by the
camaraderie of
> boatbuilding)
>
> Derek
>
>
>
> Bolger rules!!!
> - no cursing, flaming, trolling, or spamming
> - no flogging dead horses
> - add something: take "thanks!" and "ditto!" posts off-list.
> - stay on topic and punctuate
> - add your comments at the TOP and SIGN your posts
> - To order plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester,
MA,
> 01930, Fax: (978) 282-1349
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Huh? What's that? Another Bolgerist in BC?
Where are you, Derek? I'm here in Victoria -- anyone on the list is more
than welcome if they find themselves in the area -- just drop me a line. If
you're anywhere on the road between here and Prince Rupert, send me your
address, I'll be driving past this summer.
Jamie Orr
-----Original Message-----
From: John Bell [mailto:jmbell@...]
Sent: Friday, May 18, 2001 3:07 PM
To:bolger@yahoogroups.com
Subject: Re: [bolger] weekend saved (was Micro plan problem) also AF4
progress.
It was no problem, really. The plans were sitting here right next to the
computer. Tossing them on the scanner took all of two minutes.
I got the bottom on my AF4 today. There was a brief crisis when I realized
that I had not followed the panel nesting exactly and was a little short of
1/2" plywood. I had just about resigned myself that I had to go buy another
sheet when it occurred to me that I could make do with what I had by adding
an extra butt joint. Whew! Getting the bottom on is a quite a sense of
accomplishment.
I do have some business in BC if I can ever get it going. But it will be in
the inland parts, around Prince George, Quesnel, and way up north in Taylor
and Chetwynd. Have a beer for me anyway.
JB in Kennesaw.
Where are you, Derek? I'm here in Victoria -- anyone on the list is more
than welcome if they find themselves in the area -- just drop me a line. If
you're anywhere on the road between here and Prince Rupert, send me your
address, I'll be driving past this summer.
Jamie Orr
-----Original Message-----
From: John Bell [mailto:jmbell@...]
Sent: Friday, May 18, 2001 3:07 PM
To:bolger@yahoogroups.com
Subject: Re: [bolger] weekend saved (was Micro plan problem) also AF4
progress.
It was no problem, really. The plans were sitting here right next to the
computer. Tossing them on the scanner took all of two minutes.
I got the bottom on my AF4 today. There was a brief crisis when I realized
that I had not followed the panel nesting exactly and was a little short of
1/2" plywood. I had just about resigned myself that I had to go buy another
sheet when it occurred to me that I could make do with what I had by adding
an extra butt joint. Whew! Getting the bottom on is a quite a sense of
accomplishment.
I do have some business in BC if I can ever get it going. But it will be in
the inland parts, around Prince George, Quesnel, and way up north in Taylor
and Chetwynd. Have a beer for me anyway.
JB in Kennesaw.
----- Original Message -----
From: "Dawn and Derek" <dgw@...>
To: <bolger@yahoogroups.com>
Sent: Friday, May 18, 2001 3:05 PM
Subject: [bolger] weekend saved (was Micro plan problem)
Thanks for the rapid responses folks!
Special Thanks to John, for going the extra mile for me :)
Out to the 'shop (with a big grin on my face, warmed by the camaraderie of
boatbuilding)
Derek
Bolger rules!!!
- no cursing, flaming, trolling, or spamming
- no flogging dead horses
- add something: take "thanks!" and "ditto!" posts off-list.
- stay on topic and punctuate
- add your comments at the TOP and SIGN your posts
- To order plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA,
01930, Fax: (978) 282-1349
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/