Dallas area

Are there any builders in the Dallas area?

I've got everything need to complete this boat in my shop right now:
sails, spars, ballast casting. If someone on the east coast of the
North America wants a Micro fast and doesn't mind driving, they could
get quite a leg up by buying your hull and my gear!

I just wish you were closer because I'd be tempted to do it myself.

John Bell, Kennesaw, GA

--- In bolger@y..., "brucehector" <bruce_hector@h...> wrote:
> I've come to the conclusion, that as nice as MICRO is I don't
really
> want to own a cabin sailboat right now. Too slow for the time off I
> get. So "Riff-Raff's" hull and plans are on offer. All marine ply
> excepy for bulkhead A where I used 1/2" construction grade I had to
> give extra strength in the collision bulkhead, bottom is doubled
3/8"
> that finished at 3/4" thick of 10 ply plywood, very solid. All West
> System epoxy. Delivery can be arranged. $600 Canadian or $400 US.
> I'll be putting it in MAIB asap. Anyone interested contact me off
> line at bruce_hector@h... or call 1-888-214-9104

I've come to the conclusion, that as nice as MICRO is I don't really
want to own a cabin sailboat right now. Too slow for the time off I
get. So "Riff-Raff's" hull and plans are on offer. All marine ply
excepy for bulkhead A where I used 1/2" construction grade I had to
give extra strength in the collision bulkhead, bottom is doubled 3/8"
that finished at 3/4" thick of 10 ply plywood, very solid. All West
System epoxy. Delivery can be arranged. $600 Canadian or $400 US.
I'll be putting it in MAIB asap. Anyone interested contact me off
line atbruce_hector@...or call 1-888-214-9104