Re: [bolger] Galv. harware WAS-Wyo & Question?
I uploaded pictures to bolger2/photos/gate hinges. Please don't make fun of
my unfinished boat or the extra-crude rudder.
Roger S
rudders, and never have figured it out.
my unfinished boat or the extra-crude rudder.
Roger S
> "I used a pair of hot dipped "J" hinges on my Summer Breeze. Idismount"
> used the "female" hinges on the rudder. I just pull a bolt out to
>galv. gate hardware many a time trying to figure how to get it to work for
> Roger,
> This is a great idea! I've stood in the hardware store staring at
rudders, and never have figured it out.
> You don't happen to have any pictures of it do you? Or a sketch?I
> Thanks
> David
> www.simplicityboats.com
> ~~~/^\
> / \
> / /
> /_____/
> _______ /___/
> \__________/
> \/
> ----- Original Message -----
> From: Roger S
> To:bolger@yahoogroups.com
> Sent: Friday, September 13, 2002 12:46 AM
> Subject: Re: [bolger] Wyo & Question?
>
>
> Go to a chain link fence company or check Lowes in the chain link fence
> department. I used a pair of hot dipped "J" hinges on my Summer Breeze.
> used the "female" hinges on the rudder. I just pull a bolt out todismount
> it.
>
> Roger S
"I used a pair of hot dipped "J" hinges on my Summer Breeze. I
used the "female" hinges on the rudder. I just pull a bolt out to dismount"
Roger,
This is a great idea! I've stood in the hardware store staring at galv. gate hardware many a time trying to figure how to get it to work for rudders, and never have figured it out.
You don't happen to have any pictures of it do you? Or a sketch?
Thanks
David
www.simplicityboats.com
~~~/^\
/ \
/ /
/_____/
_______ /___/
\__________/
\/
used the "female" hinges on the rudder. I just pull a bolt out to dismount"
Roger,
This is a great idea! I've stood in the hardware store staring at galv. gate hardware many a time trying to figure how to get it to work for rudders, and never have figured it out.
You don't happen to have any pictures of it do you? Or a sketch?
Thanks
David
www.simplicityboats.com
~~~/^\
/ \
/ /
/_____/
_______ /___/
\__________/
\/
----- Original Message -----
From: Roger S
To:bolger@yahoogroups.com
Sent: Friday, September 13, 2002 12:46 AM
Subject: Re: [bolger] Wyo & Question?
Go to a chain link fence company or check Lowes in the chain link fence
department. I used a pair of hot dipped "J" hinges on my Summer Breeze. I
used the "female" hinges on the rudder. I just pull a bolt out to dismount
it.
Roger S
>
> I would look at getting them hot-dip galvanised. Alternatively, you
> may be able to find heavy-duty gate hinges which are already
> galvanised. I bought some hinges for about US$10 for my daughter's
> dinghy when I discovered that "proper" gudgeons and pintles would
> cost me about US$50. <snip>
> --
> Bruce Fountain (fountainb@...)
> Senior Software Engineer
> Union Switch and Signal Pty Ltd
> Perth Western Australia
> tel: +618 9256 0083
Yahoo! Groups Sponsor
ADVERTISEMENT
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- add your comments at the TOP and SIGN your posts and <snip> away
- To order plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]