Re: Mohogany refit

Thanks Peter,

Yes I have. Just enough almost touches at the apex on the swing up.
I use a 2 hp honda 4 stroke. I don't know much about motors but I'd
guess thats the biggest motor that will fit under as is .

Todd

--- In bolger@y..., "Peter Lenihan" <ellengaest@b...> wrote:
> Nice pictures and work Todd! Have you checked to see that your
> outboard will have enough clearance to swing up under the transom
> piece?
> Peter Lenihan
>
>
>
>
>
>
> --- In bolger@y..., "Todd" <ktsrfer@m...> wrote:
> > Thought I'd share my refit project of my micro that I'm still
> > working on, lots to do still.

Nice pictures and work Todd! Have you checked to see that your
outboard will have enough clearance to swing up under the transom
piece?
Peter Lenihan

--- In bolger@y..., "Todd" <ktsrfer@m...> wrote:
> Thought I'd share my refit project of my micro that I'm still
> working on, lots to do still.

Thought I'd share my refit project of my micro that I'm still
working on, lots to do still.

I finished the transom support, companion way sides, the mast support
and thwart. All the parts were built with honduras mohogany.
The pictures don't really show the quality of finish unfortunately.
I could either buy a better camera or more supplies.

Pics are under todds micro.

Todd