[bolger] Re: Premium PL?
I used PL Premium on all below waterline work and the frames on my
featherwind. I coated the bottom with epoxy (no glass) before a couple
of coats of laytex paint. So far so good. She's only a few months old,
but I've sailed her pretty much and she lives at the edge of the water
uncovered. Rainstorms sometime convert her into a bathtub when I forget
to flip her. I used "construction grade deck/project exterior waterproof
liquid nails" on the gunwales, and have had two spots seperate already.
Thumbs down on liquid nails. Thumbs up on PL Premium.
David
G Carlson wrote:
Gregg Carlson
SOME CLICKS THAT COUNT!!
Feed someone.
http://www.thehungersite.com/
Save a little rainforest.
http://rainforest.care2.com/front.html/player12296
Simplicity Boats
http://members.xoom.com/simpleboats/index.html
Here's my latest boat:
http://members.xoom.com/simpleboats/featherwind.html
Quasi esoteric musical instruments
http://unicornstrings.com
featherwind. I coated the bottom with epoxy (no glass) before a couple
of coats of laytex paint. So far so good. She's only a few months old,
but I've sailed her pretty much and she lives at the edge of the water
uncovered. Rainstorms sometime convert her into a bathtub when I forget
to flip her. I used "construction grade deck/project exterior waterproof
liquid nails" on the gunwales, and have had two spots seperate already.
Thumbs down on liquid nails. Thumbs up on PL Premium.
David
G Carlson wrote:
>fiberglass to the chines outside.
> I used it exclusively in my Bolger Pirogue - no problems. I added 3"
Gregg Carlson
>Hi everyone,--
>New to the group. Have been reading about the Premium PL in a few of
>the posts. I used it on the One Sheet Skiff, but I am wondering if you
>can use it in places like butt straps. The OSS has not really been in
>the water much and I figured that the chines would be the main source
>of strength anyway. On the 10'6" Pointy Skiff that I am building now, I
>used Weldwood on the butt straps. Could I have used Premium PL?
>Thanks,
>Rich in sunny, no rainy, no sun......Florida
> -----------------------------------------------------------------------
>
>
> eGroups.com Home:http://www.egroups.com/group/bolger
> www.egroups.com - Simplifying group communications
SOME CLICKS THAT COUNT!!
Feed someone.
http://www.thehungersite.com/
Save a little rainforest.
http://rainforest.care2.com/front.html/player12296
Simplicity Boats
http://members.xoom.com/simpleboats/index.html
Here's my latest boat:
http://members.xoom.com/simpleboats/featherwind.html
Quasi esoteric musical instruments
http://unicornstrings.com
I used it exclusively in my Bolger Pirogue - no problems. I added 3"
fiberglass to the chines outside.
Gregg Carlson
fiberglass to the chines outside.
Gregg Carlson
>Hi everyone,
>New to the group. Have been reading about the Premium PL in a few of
>the posts. I used it on the One Sheet Skiff, but I am wondering if you
>can use it in places like butt straps. The OSS has not really been in
>the water much and I figured that the chines would be the main source
>of strength anyway. On the 10'6" Pointy Skiff that I am building now, I
>used Weldwood on the butt straps. Could I have used Premium PL?
>Thanks,
>Rich in sunny, no rainy, no sun......Florida
Hi everyone,
New to the group. Have been reading about the Premium PL in a few of
the posts. I used it on the One Sheet Skiff, but I am wondering if you
can use it in places like butt straps. The OSS has not really been in
the water much and I figured that the chines would be the main source
of strength anyway. On the 10'6" Pointy Skiff that I am building now, I
used Weldwood on the butt straps. Could I have used Premium PL?
Thanks,
Rich in sunny, no rainy, no sun......Florida
New to the group. Have been reading about the Premium PL in a few of
the posts. I used it on the One Sheet Skiff, but I am wondering if you
can use it in places like butt straps. The OSS has not really been in
the water much and I figured that the chines would be the main source
of strength anyway. On the 10'6" Pointy Skiff that I am building now, I
used Weldwood on the butt straps. Could I have used Premium PL?
Thanks,
Rich in sunny, no rainy, no sun......Florida