Re: [bolger] Bolger hollywood?-Hector's Carrier
Bruce Hallman <bruce@...> wrote:
--- .
Would Bruce Hector really build an aircraft carrier? I've seen his idea proposal to Bolger and it certainly looks interesting but the cost would be huge, maybe the rust prevention business is more lucrative and not as time consuming as one thought!!!!
As a side note maybe Bruce should checkout the Australian built version of the WWII Fiesler Storch STOL aircraft especially the one with a 2.0 Litre, 5 or 7 cylinder(Not sure about that,from memory)radial engine in the camoflague paint work for his "Fleet Air Arm".I think the can supply it in 'Kit' form.
They do have a website but I can't remember the address offhand so you'd have do do a web search.
Then, of course, he might still
design an Aircraft Carrier. And,
if he did, Bruce Hector would build
it!
Yahoo! Groups SponsorADVERTISEMENT
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Yahoo! Search
- Looking for more? Try the new Yahoo! Search
[Non-text portions of this message have been removed]
--- .
Would Bruce Hector really build an aircraft carrier? I've seen his idea proposal to Bolger and it certainly looks interesting but the cost would be huge, maybe the rust prevention business is more lucrative and not as time consuming as one thought!!!!
As a side note maybe Bruce should checkout the Australian built version of the WWII Fiesler Storch STOL aircraft especially the one with a 2.0 Litre, 5 or 7 cylinder(Not sure about that,from memory)radial engine in the camoflague paint work for his "Fleet Air Arm".I think the can supply it in 'Kit' form.
They do have a website but I can't remember the address offhand so you'd have do do a web search.
Then, of course, he might still
design an Aircraft Carrier. And,
if he did, Bruce Hector would build
it!
Yahoo! Groups SponsorADVERTISEMENT
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Yahoo! Search
- Looking for more? Try the new Yahoo! Search
[Non-text portions of this message have been removed]
Did you know that the Rose was at a shipyard in Boothbay, Maine
getting some bottom palnks replaced? I remember seeing her there all
last summer.
Steve Bosquette
getting some bottom palnks replaced? I remember seeing her there all
last summer.
Steve Bosquette
--- Inbolger@yahoogroups.com, Harry James <welshman@p...> wrote:
> Or Jack Aubrey coming over the rail in full warcry cutlass in hand.
> My son saved me the same poster you can almost smell the salt and
hear
> the creak of the rigging. I wonder if anybody sent a copy to Mr.
Bolger.
>
Or Jack Aubrey coming over the rail in full warcry cutlass in hand.
My son saved me the same poster you can almost smell the salt and hear
the creak of the rigging. I wonder if anybody sent a copy to Mr. Bolger.
HJ
pvanderwaart wrote:
My son saved me the same poster you can almost smell the salt and hear
the creak of the rigging. I wonder if anybody sent a copy to Mr. Bolger.
HJ
pvanderwaart wrote:
>We got a full size poster with our newspaper a couple of weeks ago
>with a very moody picture of the ship. Ah, advertising. I don't know
>how much hope to have for the movie. The A&E Hornblower series was
>worth about at B-, I thought.
>
>I think most Hollywood moguls don't think the big audience is very
>interested in 19th century naval warfare, so I look for the love
>interest to be played up big.
>
>Peter
>
>
>
>
We got a full size poster with our newspaper a couple of weeks ago
with a very moody picture of the ship. Ah, advertising. I don't know
how much hope to have for the movie. The A&E Hornblower series was
worth about at B-, I thought.
I think most Hollywood moguls don't think the big audience is very
interested in 19th century naval warfare, so I look for the love
interest to be played up big.
Peter
with a very moody picture of the ship. Ah, advertising. I don't know
how much hope to have for the movie. The A&E Hornblower series was
worth about at B-, I thought.
I think most Hollywood moguls don't think the big audience is very
interested in 19th century naval warfare, so I look for the love
interest to be played up big.
Peter
Had the same feeling re Crowe vs Jack's robust physique, but suspect Mr.
Crowe is such a good actor he'll manage to convey a balanced impression of
stout/active Jno. Aubrey....
David "hey, we're still afloat on Kent Island" Romasco
-----Original Message-----
From: Harry James [mailto:welshman@...]
Sent: Monday, September 22, 2003 11:38 AM
To:bolger@yahoogroups.com
Subject: Re: [bolger] Bolger goes hollywood?
The original Rose was used in New England by the British during the
Revolutionary War. This is a case of typecasting as the Rose was a
1760's 28 gun Frigate as is the Surprise, Aubrey's ship. Casting Crowe
as Aubrey is a little off, Aubrey was built like John Goodman not
Russell Crowe.
HJ
Hugo Tyson wrote:
"Rose".I think she was built in Nova Scotia in the late '60s or very early
'70s and was one of the last if not the last wooden full rigged ship built.I
think Bolger was living in Majorca when he designed the Rose, which I
think,but could be wrong is the largest vessel he has designed.
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=17050657
91:HM/A=1754016/R=0/SIG=11pv1u2ju/*http://www.ediets.com/start.cfm?code=3052
9&media=atkins> click here
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupmai
l/S=:HM/A=1754016/rand=447248316>
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax:
(978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Crowe is such a good actor he'll manage to convey a balanced impression of
stout/active Jno. Aubrey....
David "hey, we're still afloat on Kent Island" Romasco
-----Original Message-----
From: Harry James [mailto:welshman@...]
Sent: Monday, September 22, 2003 11:38 AM
To:bolger@yahoogroups.com
Subject: Re: [bolger] Bolger goes hollywood?
The original Rose was used in New England by the British during the
Revolutionary War. This is a case of typecasting as the Rose was a
1760's 28 gun Frigate as is the Surprise, Aubrey's ship. Casting Crowe
as Aubrey is a little off, Aubrey was built like John Goodman not
Russell Crowe.
HJ
Hugo Tyson wrote:
>Yes Sam the "Rose" certainly is the ship Bolger designed or more correctlyre-designed from some old British Admilraty line drawings of the original
"Rose".I think she was built in Nova Scotia in the late '60s or very early
'70s and was one of the last if not the last wooden full rigged ship built.I
think Bolger was living in Majorca when he designed the Rose, which I
think,but could be wrong is the largest vessel he has designed.
> Hugo Tyson, TasmaniaYahoo! Groups Sponsor
>Sam Glasscock <glasscocklanding@...> wrote:
>I just read a short article on the new "Master and
>Commander" movie, to be released this fall. The
>scenes at sea feature the "HMS Rose." Is this the
>ship PB designed? Anybody know the history of this
>vessel? Thanks, Sam
>
>
>
>
ADVERTISEMENT
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=17050657
91:HM/A=1754016/R=0/SIG=11pv1u2ju/*http://www.ediets.com/start.cfm?code=3052
9&media=atkins> click here
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupmai
l/S=:HM/A=1754016/rand=447248316>
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax:
(978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
The original Rose was used in New England by the British during the
Revolutionary War. This is a case of typecasting as the Rose was a
1760's 28 gun Frigate as is the Surprise, Aubrey's ship. Casting Crowe
as Aubrey is a little off, Aubrey was built like John Goodman not
Russell Crowe.
HJ
Hugo Tyson wrote:
Revolutionary War. This is a case of typecasting as the Rose was a
1760's 28 gun Frigate as is the Surprise, Aubrey's ship. Casting Crowe
as Aubrey is a little off, Aubrey was built like John Goodman not
Russell Crowe.
HJ
Hugo Tyson wrote:
>Yes Sam the "Rose" certainly is the ship Bolger designed or more correctly re-designed from some old British Admilraty line drawings of the original "Rose".I think she was built in Nova Scotia in the late '60s or very early '70s and was one of the last if not the last wooden full rigged ship built.I think Bolger was living in Majorca when he designed the Rose, which I think,but could be wrong is the largest vessel he has designed.
> Hugo Tyson, Tasmania
>Sam Glasscock <glasscocklanding@...> wrote:
>I just read a short article on the new "Master and
>Commander" movie, to be released this fall. The
>scenes at sea feature the "HMS Rose." Is this the
>ship PB designed? Anybody know the history of this
>vessel? Thanks, Sam
>
>
>
>
--- Hugo Tyson wrote:
of his designs to have been built.
I believe the 'Margaret Mead' design
is larger (?) [but never built.]
Then, of course, he might still
design an Aircraft Carrier. And,
if he did, Bruce Hector would build
it!
> "Rose" ... is theMy guess is that it is the largest
> largest vessel he has designed(?)
of his designs to have been built.
I believe the 'Margaret Mead' design
is larger (?) [but never built.]
Then, of course, he might still
design an Aircraft Carrier. And,
if he did, Bruce Hector would build
it!
Yes Sam the "Rose" certainly is the ship Bolger designed or more correctly re-designed from some old British Admilraty line drawings of the original "Rose".I think she was built in Nova Scotia in the late '60s or very early '70s and was one of the last if not the last wooden full rigged ship built.I think Bolger was living in Majorca when he designed the Rose, which I think,but could be wrong is the largest vessel he has designed.
Hugo Tyson, Tasmania
Sam Glasscock <glasscocklanding@...> wrote:
I just read a short article on the new "Master and
Commander" movie, to be released this fall. The
scenes at sea feature the "HMS Rose." Is this the
ship PB designed? Anybody know the history of this
vessel? Thanks, Sam
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Yahoo! Groups SponsorADVERTISEMENT
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Yahoo! Search
- Looking for more? Try the new Yahoo! Search
[Non-text portions of this message have been removed]
Hugo Tyson, Tasmania
Sam Glasscock <glasscocklanding@...> wrote:
I just read a short article on the new "Master and
Commander" movie, to be released this fall. The
scenes at sea feature the "HMS Rose." Is this the
ship PB designed? Anybody know the history of this
vessel? Thanks, Sam
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Yahoo! Groups SponsorADVERTISEMENT
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Yahoo! Search
- Looking for more? Try the new Yahoo! Search
[Non-text portions of this message have been removed]
I just read a short article on the new "Master and
Commander" movie, to be released this fall. The
scenes at sea feature the "HMS Rose." Is this the
ship PB designed? Anybody know the history of this
vessel? Thanks, Sam
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Commander" movie, to be released this fall. The
scenes at sea feature the "HMS Rose." Is this the
ship PB designed? Anybody know the history of this
vessel? Thanks, Sam
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
> But is it also a dessert topping?Yes, Sue, and besides that, it slices, dices, and makes Julienne Fries.
> --
> Susan Davis <futabachan@...>
Chuck
(Apologies to you kids, Sue included, who are too young to remember this
reference)
Chuck:
--
Susan Davis <futabachan@...>
> I agree with Peter. I have used J&J floor wax many times as a releaseBut is it also a dessert topping?
> agent, and it works well.
--
Susan Davis <futabachan@...>
I've used it for coating steel and iron surfaces too. Another use. My
father used J&J paste wax for what he called "poor man's French
polish. After a coat or two of clear urethane coating, get the finest
steel or bronze wool you can find, put some paste wax on it and rub
gently into wood. Finish by wiping and then buffing with a clean
cotton cloth or buffing pad.
father used J&J paste wax for what he called "poor man's French
polish. After a coat or two of clear urethane coating, get the finest
steel or bronze wool you can find, put some paste wax on it and rub
gently into wood. Finish by wiping and then buffing with a clean
cotton cloth or buffing pad.
--- Inbolger@yahoogroups.com, "Roger Derby" <derbyrm@s...> wrote:
> That stuff is also a Godsend for coating table saw tables, drill
press
> columns, and any other iron surface that would otherwise rust in
the 100%
> humidity common in this area. Smear it on, let dry for a few
minutes, then
> wipe off as much as you can. Preheating the iron with a hair dryer
would
> probably make it even more effective. Doesn't stain the wood as
grease
> would and doesn't seem to transfer enough to the wood to affect the
> glue/epoxy/paint bond.
>
> Roger
> derbyrm@s...
>http://derbyrm.mystarband.net
>
> ----- Original Message -----
> From: "Chuck Leinweber" <chuck@d...>
>
> > I agree with Peter. I have used J&J floor wax many times as a
release
> > agent, and it works well.
> > Chuck
> >
> > > Hi Marc,
> > > Get some Johnson&Johnson floor wax/paste and apply it to
the
> > > threads only.Otherwise your approach sounds good.
> > > Peter Lenihan
That stuff is also a Godsend for coating table saw tables, drill press
columns, and any other iron surface that would otherwise rust in the 100%
humidity common in this area. Smear it on, let dry for a few minutes, then
wipe off as much as you can. Preheating the iron with a hair dryer would
probably make it even more effective. Doesn't stain the wood as grease
would and doesn't seem to transfer enough to the wood to affect the
glue/epoxy/paint bond.
Roger
derbyrm@...
http://derbyrm.mystarband.net
columns, and any other iron surface that would otherwise rust in the 100%
humidity common in this area. Smear it on, let dry for a few minutes, then
wipe off as much as you can. Preheating the iron with a hair dryer would
probably make it even more effective. Doesn't stain the wood as grease
would and doesn't seem to transfer enough to the wood to affect the
glue/epoxy/paint bond.
Roger
derbyrm@...
http://derbyrm.mystarband.net
----- Original Message -----
From: "Chuck Leinweber" <chuck@...>
> I agree with Peter. I have used J&J floor wax many times as a release
> agent, and it works well.
> Chuck
>
> > Hi Marc,
> > Get some Johnson&Johnson floor wax/paste and apply it to the
> > threads only.Otherwise your approach sounds good.
> > Peter Lenihan
I agree with Peter. I have used J&J floor wax many times as a release
agent, and it works well.
Chuck
agent, and it works well.
Chuck
> Hi Marc,
> Get some Johnson&Johnson floor wax/paste and apply it to the
> threads only.Otherwise your approach sounds good.
>
>
> Peter Lenihan
Bruce, thanks, I'll buy the book. I have seen everything in the database and am impressed but it doesn't let me into his mind and reasoning. I think the book will help. Maybe previous articles will also.
Don
Bruce Hallman <bruce@...> wrote:
--- Don Tyson wrote:
_Boats with an Open Mind_
This Yahoo group has a database that
shows about 2/3rds of the PCB & PBF designs.
...click around, you will find it :)
Perhaps 50% of the designs have been
featured in the magazine _Messing About
In Boats_, and most (all?) of these articles
are available as 'reprints', for cheap,
directly from the publisher Bob Hicks.
See the index at:
http://www.messingaboutinboats.com/archive.html
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
Don
Bruce Hallman <bruce@...> wrote:
--- Don Tyson wrote:
> Can someone recommend BooksStart with his last book, still in print:
> on Bolgers designs?
_Boats with an Open Mind_
This Yahoo group has a database that
shows about 2/3rds of the PCB & PBF designs.
...click around, you will find it :)
Perhaps 50% of the designs have been
featured in the magazine _Messing About
In Boats_, and most (all?) of these articles
are available as 'reprints', for cheap,
directly from the publisher Bob Hicks.
See the index at:
http://www.messingaboutinboats.com/archive.html
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
--- Don Tyson wrote:
_Boats with an Open Mind_
This Yahoo group has a database that
shows about 2/3rds of the PCB & PBF designs.
...click around, you will find it :)
Perhaps 50% of the designs have been
featured in the magazine _Messing About
In Boats_, and most (all?) of these articles
are available as 'reprints', for cheap,
directly from the publisher Bob Hicks.
See the index at:
http://www.messingaboutinboats.com/archive.html
> Can someone recommend BooksStart with his last book, still in print:
> on Bolgers designs?
_Boats with an Open Mind_
This Yahoo group has a database that
shows about 2/3rds of the PCB & PBF designs.
...click around, you will find it :)
Perhaps 50% of the designs have been
featured in the magazine _Messing About
In Boats_, and most (all?) of these articles
are available as 'reprints', for cheap,
directly from the publisher Bob Hicks.
See the index at:
http://www.messingaboutinboats.com/archive.html
The real advantage to parafin is that (if you use a colored candle) you can see wether or not it has migrated as lighter or oilier substance will do.
I have a question. Peter just pointed out the dif btwn Champ. and Wndmr. Can someone recommend Books on Bolgers designs. I have Common Sence Designs and Paysons Books but nothing on Bolger.
Sincerely,
Don Tyson
Don Tyson <tysond99@...> wrote:
I've done this but I used Parafin pilfered from one of my wifes candles.
Works good.
"Bruce C. Anderson" wrote:
Howdy
good to me. :)
Good Luck
See Ya
Have Fun
Bruce
http://myweb.cableone.net/bcanderson/
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
I have a question. Peter just pointed out the dif btwn Champ. and Wndmr. Can someone recommend Books on Bolgers designs. I have Common Sence Designs and Paysons Books but nothing on Bolger.
Sincerely,
Don Tyson
Don Tyson <tysond99@...> wrote:
I've done this but I used Parafin pilfered from one of my wifes candles.
Works good.
"Bruce C. Anderson" wrote:
Howdy
> -----Original Message-----Consider using a Wing nut for the embedded fastener. Otherwise sounds
> Subject: [bolger] Release agent for stainless steel
>
>
> I want to embed a stainless steel nut and bolt in epoxy such
> that the nut stays
> permanently in the epoxy
good to me. :)
Good Luck
See Ya
Have Fun
Bruce
http://myweb.cableone.net/bcanderson/
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
I've done this but I used Parafin pilfered from one of my wifes candles.
Works good.
"Bruce C. Anderson" <bcanderson@...> wrote:
Howdy
good to me. :)
Good Luck
See Ya
Have Fun
Bruce
http://myweb.cableone.net/bcanderson/
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
Works good.
"Bruce C. Anderson" <bcanderson@...> wrote:
Howdy
> -----Original Message-----Consider using a Wing nut for the embedded fastener. Otherwise sounds
> Subject: [bolger] Release agent for stainless steel
>
>
> I want to embed a stainless steel nut and bolt in epoxy such
> that the nut stays
> permanently in the epoxy
good to me. :)
Good Luck
See Ya
Have Fun
Bruce
http://myweb.cableone.net/bcanderson/
Bolger rules!!!
- no cursing, flaming, trolling, spamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
Your use of Yahoo! Groups is subject tohttp://docs.yahoo.com/info/terms/
[Non-text portions of this message have been removed]
--- Inbolger@yahoogroups.com, "Marc Paquette" <mapaquette@y...>
wrote:
Hi Marc,
Get some Johnson&Johnson floor wax/paste and apply it to the
threads only.Otherwise your approach sounds good.
Peter Lenihan
wrote:
Hi Marc,
Get some Johnson&Johnson floor wax/paste and apply it to the
threads only.Otherwise your approach sounds good.
Peter Lenihan
> I want to embed a stainless steel nut and bolt in epoxy such thatthe nut stays
> permanently in the epoxy but the threads of the nut and bolt areclean, allowing the
> bolt to be screwed in and out:
>
Howdy
good to me. :)
Good Luck
See Ya
Have Fun
Bruce
http://myweb.cableone.net/bcanderson/
> -----Original Message-----Consider using a Wing nut for the embedded fastener. Otherwise sounds
> Subject: [bolger] Release agent for stainless steel
>
>
> I want to embed a stainless steel nut and bolt in epoxy such
> that the nut stays
> permanently in the epoxy
good to me. :)
Good Luck
See Ya
Have Fun
Bruce
http://myweb.cableone.net/bcanderson/
I want to embed a stainless steel nut and bolt in epoxy such that the nut stays
permanently in the epoxy but the threads of the nut and bolt are clean, allowing the
bolt to be screwed in and out:
1. Clean and degrease the stainless steel nut and bolt meticulously.
2. With a cotton swab, carefully "paint" the threads of the nut and bolt with a light
coat of cooking oil.
3. Thread the bolt into the nut to the required depth and position them in the cavity
that the nut will be sealed in.
4. Fill the cavity with (slightly thickened) epoxy.
5. After epoxy sets, unscrew and screw the bolt arbitrarily.
Does that make sense?
Marc.
permanently in the epoxy but the threads of the nut and bolt are clean, allowing the
bolt to be screwed in and out:
1. Clean and degrease the stainless steel nut and bolt meticulously.
2. With a cotton swab, carefully "paint" the threads of the nut and bolt with a light
coat of cooking oil.
3. Thread the bolt into the nut to the required depth and position them in the cavity
that the nut will be sealed in.
4. Fill the cavity with (slightly thickened) epoxy.
5. After epoxy sets, unscrew and screw the bolt arbitrarily.
Does that make sense?
Marc.