Re: Micro builders/owners in Chesapeake Bay area?
Rod -
You can visit my web site to see some photos of my Micro going
together.http://mysite.verizon.net/vzeokhsb/Micro.htm
The only part I found troublesome was the bow transom. It needs to
be measured and visualized about 20 times before cutting. The other
part I recommend is getting a friend to help with the keel ballast
casting installation.
Start with the mizzen for a tune up and you will get pyched up fast!
David Jost
builder of the Micro "Firefly"
You can visit my web site to see some photos of my Micro going
together.http://mysite.verizon.net/vzeokhsb/Micro.htm
The only part I found troublesome was the bow transom. It needs to
be measured and visualized about 20 times before cutting. The other
part I recommend is getting a friend to help with the keel ballast
casting installation.
Start with the mizzen for a tune up and you will get pyched up fast!
David Jost
builder of the Micro "Firefly"
Got my set of plans from PB&F and am looking to locate Micros and
Micro Navigators in
the Chesapeak Bay area.
Never built a boat before.
I'd appreciate the chance for a look/see before I start cutting wood.
Micro Navigators in
the Chesapeak Bay area.
Never built a boat before.
I'd appreciate the chance for a look/see before I start cutting wood.