Re: [bolger] Re: Monhegan

> For about the same money and labor, you could build
> Wenda which is probably a more useful boat.

18' Monhegan has an inboard diesel motor, which is just the right
thing if that is what you want. Wenda has no motor, and no
reasonable way to have a motor, which is again just the right
thing if that is what you want.

Wenda is 25% long than Monhegan, and probaly about 15%
more work to build the hull. Wenda would be cheaper [by the
cost of the motor.]

All things equal, I want both of these boats, but would build
a Wenda first, I think it is more beautiful.
I was smitten by a profile drawing that appeared in Motor Boating and
Sailing in the early 70's. It ignited an interest in traditional boats and
boatbuilding which has lasted ever since. I fantasized about building her
and obtained the portfolio of designs which eventually became the book Small
Boats.

The good news is that she is absolutely gorgeous. The bad news is that
Monhegan is a functioning model, much like the Cape Dory Typhoon. The
cockpit is a little too small for comfort; the cabin is too small to do
anything except store sails and a cooler. With a short waterline and a lot
of ballast, Monhegan is probably a good ghoster, but her ultimate speed is
probably not great. For about the same money and labor, you could build
Wenda which is probably a more useful boat.

John T
----- Original Message -----
From: "Harry James" <welshman@...>
To: <bolger@yahoogroups.com>
Sent: Saturday, October 29, 2005 7:33 PM
Subject: Re: [bolger] Re: Monhegan


> Its in Small Boats, pg 99.
>
> Its a Friendship Sloop, gaff rigged. The cuddy cabin is for storage and
> a porta potty, no bunks. If you can wait till Tuesday I can scan the
> chapter and email it to you.
>
> HJ
>
> Robin Badenoch wrote:
>
>>Hi all,
>> Where can I get more information cartoon line drawings etc on the
>>Monhegan. Has one ever been built.It looks like a great little boat.
>>
>>Rob B
>>
>>
>>>>Where is Monhegan llisted, is the prop hole really in the deadwood
>>>>like that?
>>>>
>>>>HJ
>>>>
>>>>
>>>It written up in BWAOM, and the model is a bit sloppy, but yes the
>>>propeller is in the 'deadwood' if that is what it is called.
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
> Bolger rules!!!
> - no cursing, flaming, trolling, spamming, respamming, or flogging dead
> horses
> - stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
> - Pls add your comments at the TOP, SIGN your posts, and snip away
> - Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax:
> (978) 282-1349
> - Unsubscribe:bolger-unsubscribe@yahoogroups.com
> - Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.12.1/136 - Release Date: 10/15/2005
>
>
Its in Small Boats, pg 99.

Its a Friendship Sloop, gaff rigged. The cuddy cabin is for storage and
a porta potty, no bunks. If you can wait till Tuesday I can scan the
chapter and email it to you.

HJ

Robin Badenoch wrote:

>Hi all,
> Where can I get more information cartoon line drawings etc on the
>Monhegan. Has one ever been built.It looks like a great little boat.
>
>Rob B
>
>
>>>Where is Monhegan llisted, is the prop hole really in the deadwood
>>>like that?
>>>
>>>HJ
>>>
>>>
>>It written up in BWAOM, and the model is a bit sloppy, but yes the
>>propeller is in the 'deadwood' if that is what it is called.
>>
>>
>>
>
>
>
>
Hi all,
Where can I get more information cartoon line drawings etc on the
Monhegan. Has one ever been built.It looks like a great little boat.

Rob B
> > Where is Monhegan llisted, is the prop hole really in the deadwood
> > like that?
> >
> > HJ
>
> It written up in BWAOM, and the model is a bit sloppy, but yes the
> propeller is in the 'deadwood' if that is what it is called.
>
> because you had the prop gap
> totally in the deadwood ahead of the rudder with
> more deadwood between the prop and the rudder.

As drawn the opening is about 95% in the deadwood and 5% in the
rudder. The rudder stock terminates at the top of the opening. No
deadwood between rudder and propellor.
> ...hurried placement...

Yep, those models are put together very much in a rush.
Yep,
Bruce; my comment on the prop placement was because you had the prop gap
totally in the deadwood ahead of the rudder with more deadwood between
the prop and the rudder. This would be an unusual placement and I was
wondering if this was Bolgerism that I hadn't run into before. As it
turns out it was just hurried placement of an ink splash and now you
know we are really looking at your work.

Thank you very much for your efforts.

HJ

pvanderwaart wrote:

>>It written up in BWAOM...
>>
>>
>
>Not in my copy. In my library it's in "Small Boats".
>
>:)
>
>
>
>
>
>
>Bolger rules!!!
>- no cursing, flaming, trolling, spamming, respamming, or flogging dead horses
>- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
>- Pls add your comments at the TOP, SIGN your posts, and snip away
>- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
>- Unsubscribe:bolger-unsubscribe@yahoogroups.com
>- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>



[Non-text portions of this message have been removed]
> It written up in BWAOM...

Not in my copy. In my library it's in "Small Boats".

:)
On 10/28/05, Harry James <welshman@...> wrote:
> Where is Monhegan llisted, is the prop hole really in the deadwood
> like that?
>
> HJ

It written up in BWAOM, and the model is a bit sloppy, but yes the
propeller is in the 'deadwood' if that is what it is called.
Hi Bruce,
I have to tell you I'm getting the biggest kick out of seeing your models. I'm afraid if I say keep up the good work you'll start charging an admission price to see your photos. Thanks for sharing.
Philip

Bruce Hallman <bruce@...> wrote:
http://community.webshots.com/album/488210847EcLqjd

Monhegan is a sweet little boat, 18 feet long, one again
achievable quickly in plywood lapstrake I'd dare. I like
the simplicity of the idea of using inside concrete for
ballast.


Bolger rules!!!
- no cursing, flaming, trolling, spamming, respamming, or flogging dead horses
- stay on topic, stay on thread, punctuate, no 'Ed, thanks, Fred' posts
- Pls add your comments at the TOP, SIGN your posts, and snip away
- Plans: Mr. Philip C. Bolger, P.O. Box 1209, Gloucester, MA, 01930, Fax: (978) 282-1349
- Unsubscribe:bolger-unsubscribe@yahoogroups.com
- Open discussion:bolger_coffee_lounge-subscribe@yahoogroups.com



SPONSORED LINKS
Boating safety Boating magazine Alaska outdoors Great outdoors

---------------------------------
YAHOO! GROUPS LINKS


Visit your group "bolger" on the web.

To unsubscribe from this group, send an email to:
bolger-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------




---------------------------------
Yahoo! FareChase - Search multiple travel sites in one click.

[Non-text portions of this message have been removed]
Where is MoMonhegan llisted, is the prop hole really in the deadwood
like that?

HJ

Bruce Hallman wrote:

>http://community.webshots.com/album/488210847EcLqjd
>
>Monhegan is a sweet little boat, 18 feet long, one again
>achievable quickly in plywood lapstrake I'd dare. I like
>the simplicity of the idea of using inside concrete for
>ballast.
>
>
>
http://community.webshots.com/album/488210847EcLqjd

Monhegan is a sweet little boat, 18 feet long, one again
achievable quickly in plywood lapstrake I'd dare. I like
the simplicity of the idea of using inside concrete for
ballast.