Re: Help needed....
Your boat project sounds very nice. From what I've seen of the San
Juans, it is a beautiful place. I spent some time out there, plus
Seattle and Bellingham. Nice view of the islands from the top of the
Chuckanut range. I wish you luck, and yes I will keep dreaming, and
maybe start building soon!
Steve
Juans, it is a beautiful place. I spent some time out there, plus
Seattle and Bellingham. Nice view of the islands from the top of the
Chuckanut range. I wish you luck, and yes I will keep dreaming, and
maybe start building soon!
Steve
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@...> wrote:
>
> Hey Steve I have a old 17 foot fiberglass vee hull
> that is going to get fixed up. I've been on San Juan
> Island for over 7 years and have never put a boat in
> the water! I had the outboard stolen off it and the
> cops were less then helpful.
>
> Well last weekend I picked up a good running 65 HP
> that was being trouted as a short shaft.... Well it's
> a long shaft and will be going on the hull as soon as
> the weather warms up.
>
> Then I will be fixing up the hull with a small cabin
> and leave room in the back so there is room to sleep
> on the deck. I'm thinking of putting a small walk
> through cabin on it with two seats and a bit of
> counterspace so one can do a bit of cooking when you
> are out. Cold food is not fun when it's cold out there
> too!
>
> Hey at times Dreams are the only thing that keep us
> alive and moving ahead!
>
> So keep the dream alive and well! For if it was not
> for me keeping a dream alive I would be dead. It was
> just a small dream that did the job. When you hate
> life it's hard to keep a dream alive. But I did and
> I'm still here and very much in love with life!
>
> So keep on dreaming but at some point make the dream
> REAL TOO! I did and enjoying it every day!
>
> Very Bright Blessings to all
> Krissie
>
> --- devemaster1 <devemaster1@...> wrote:
>
> > I'll take full responsibility for my involvement,
> > such as it was, and
> > you can laugh hardest at me, especially if you have
> > a boat, working or
> > not, because you're closer to the dream than I am.
> >
> > Currently my boats are of the conceptual variety
> > with the occasional
> > paper model. More often they are scribblings in the
> > margins of "mmore
> > important" paperwork.
> >
> > Soon though, I hope, THE BOAT will begin to be
> > built. As Jim Kirk
> > might say: Must...hang on... to ...the...dream!
> >
> >
> > cheers,
> >
> > Steve
> >
>
>
>
>
>
____________________________________________________________________________________
> Now that's room service! Choose from over 150,000 hotels
> in 45,000 destinations on Yahoo! Travel to find your fit.
>http://farechase.yahoo.com/promo-generic-14795097
>
Hey Steve I have a old 17 foot fiberglass vee hull
that is going to get fixed up. I've been on San Juan
Island for over 7 years and have never put a boat in
the water! I had the outboard stolen off it and the
cops were less then helpful.
Well last weekend I picked up a good running 65 HP
that was being trouted as a short shaft.... Well it's
a long shaft and will be going on the hull as soon as
the weather warms up.
Then I will be fixing up the hull with a small cabin
and leave room in the back so there is room to sleep
on the deck. I'm thinking of putting a small walk
through cabin on it with two seats and a bit of
counterspace so one can do a bit of cooking when you
are out. Cold food is not fun when it's cold out there
too!
Hey at times Dreams are the only thing that keep us
alive and moving ahead!
So keep the dream alive and well! For if it was not
for me keeping a dream alive I would be dead. It was
just a small dream that did the job. When you hate
life it's hard to keep a dream alive. But I did and
I'm still here and very much in love with life!
So keep on dreaming but at some point make the dream
REAL TOO! I did and enjoying it every day!
Very Bright Blessings to all
Krissie
--- devemaster1 <devemaster1@...> wrote:
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097
that is going to get fixed up. I've been on San Juan
Island for over 7 years and have never put a boat in
the water! I had the outboard stolen off it and the
cops were less then helpful.
Well last weekend I picked up a good running 65 HP
that was being trouted as a short shaft.... Well it's
a long shaft and will be going on the hull as soon as
the weather warms up.
Then I will be fixing up the hull with a small cabin
and leave room in the back so there is room to sleep
on the deck. I'm thinking of putting a small walk
through cabin on it with two seats and a bit of
counterspace so one can do a bit of cooking when you
are out. Cold food is not fun when it's cold out there
too!
Hey at times Dreams are the only thing that keep us
alive and moving ahead!
So keep the dream alive and well! For if it was not
for me keeping a dream alive I would be dead. It was
just a small dream that did the job. When you hate
life it's hard to keep a dream alive. But I did and
I'm still here and very much in love with life!
So keep on dreaming but at some point make the dream
REAL TOO! I did and enjoying it every day!
Very Bright Blessings to all
Krissie
--- devemaster1 <devemaster1@...> wrote:
> I'll take full responsibility for my involvement,____________________________________________________________________________________
> such as it was, and
> you can laugh hardest at me, especially if you have
> a boat, working or
> not, because you're closer to the dream than I am.
>
> Currently my boats are of the conceptual variety
> with the occasional
> paper model. More often they are scribblings in the
> margins of "mmore
> important" paperwork.
>
> Soon though, I hope, THE BOAT will begin to be
> built. As Jim Kirk
> might say: Must...hang on... to ...the...dream!
>
>
> cheers,
>
> Steve
>
Now that's room service! Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097
I'll take full responsibility for my involvement, such as it was, and
you can laugh hardest at me, especially if you have a boat, working or
not, because you're closer to the dream than I am.
Currently my boats are of the conceptual variety with the occasional
paper model. More often they are scribblings in the margins of "mmore
important" paperwork.
Soon though, I hope, THE BOAT will begin to be built. As Jim Kirk
might say: Must...hang on... to ...the...dream!
cheers,
Steve
you can laugh hardest at me, especially if you have a boat, working or
not, because you're closer to the dream than I am.
Currently my boats are of the conceptual variety with the occasional
paper model. More often they are scribblings in the margins of "mmore
important" paperwork.
Soon though, I hope, THE BOAT will begin to be built. As Jim Kirk
might say: Must...hang on... to ...the...dream!
cheers,
Steve
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@...> wrote:
>
> Ok blame the dyke out on the west coast. Yep she done,
> did it! Yep Yep. I need to thank you guys When I first
> looked at this I passed it off and then took the time
> to reread it and just laughed myself silly! Yes it was
> something I needed seeing how I was in the dumps at
> the time. I'll be honest spelling is not my best
> subject seeing how I'm dislexic, even with spell check
> I'm not always sure thinges are right. I will laugh
> right along with you when I make a mistake! For me
> life is far to short to be mad all the time like some
> in this world.
>
> Laughter is good for the heart and soul!
>
> Bright Blessings to you all!
> Krissie
>
> --- derbyrm <derbyrm@...> wrote:
>
> > I was afraid I was going to start something.
> >
> > Let's blame it on Krissie.
> >
> > Roger
> > derbyrm@...
> >http://home.insightbb.com/~derbyrm
> >
> > ----- Original Message -----
> > From: devemaster1
> > To:bolger@yahoogroups.com
> > Sent: Monday, January 15, 2007 5:40 PM
> > Subject: [bolger] Re: Help needed....
> >
> >
> > And then-
> >
> > The boyfriend gave her a REAL jigsaw puzzle, a 100
> > piece jobbie of a
> > duckie and a horsie that said for 3 to 5 years,
> > knowing full well that
> > she would be thrilled when she solved it in only 2
> > years.
> >
> > Sorry, couldn't resist.
> >
> > --- Inbolger@yahoogroups.com, "derbyrm"
> > <derbyrm@> wrote:
> > >
> > > I think she meant blonde, as in:
> > >
> > > A blonde calls her boyfriend and says, "Please
> > come over here and
> > help me. I have a killer jigsaw puzzle, and I
> > can't figure out how to
> > get it started."
> > >
> > > Her boyfriend asks, "What is it supposed to be
> > when it's finished?"
> > >
> > > The blonde says, "According to the picture on
> > the box, it's a tiger."
> > >
> > > Her boyfriend decides to go over and help with
> > the puzzle. She lets
> > him in and shows him where she has the puzzle
> > spread all over the table.
> > >
> > > He studies the pieces for a moment, then looks
> > at the box, then
> > turns to her and says, "First of all, no matter
> > what we do, we're not
> > going to be able to assemble these pieces into
> > anything resembling a
> > tiger."
> > >
> > > He takes her hand and says, "Second, I want you
> > to relax. Let's have
> > a nice cup of tea, and then ..." he sighed ...
> > > "Let's put all the Frosted Flakes back in the
> > box......."
> > >
> > > Roger
> > > derbyrm@
> > >http://home.insightbb.com/~derbyrm
> > >
> > > ----- Original Message -----
> > > From: Peter Lenihan
> > > To:bolger@yahoogroups.com
> > > Sent: Saturday, January 13, 2007 3:14 AM
> > > Subject: [bolger] Re: Help needed....
> > >
> > >
> > > --- Inbolger@yahoogroups.com, Kristine Bennett
> > <femmpaws@> wrote:
> > >
> > > Here ya go Kristine;
> > >
> > >
> >
>http://groups.yahoo.com/group/bolger7/files/Bonefish/
> > >
> > > Now,what the blazes is a "blond day".....we have
> > sunny days,cloudy
> > > days,rainy days,snowy days even grey days but
> > blond?
> > >
> > > Sincerely,
> > >
> > > Peter Lenihan, having a cloudy/rainy day combo
> > here along the shores
> > > of the St.lawrence..........
> > >
> > > >
> > > > Good Evening all I do hope your new year has
> > got off
> > > > to a good start.
> > > >
> > > > Now to my need... I know I had looked at a
> > file for
> > > > the Bonefish here and I can't find it again.
> > Would
> > > > someone know where it is at?
> > > >
> > > > Yes I'm having a blond day.
> > > >
> > > > Blessings to all
> > > > Krissie
> > > >
> > > >
> > > >
> > > >
> > >
> >
> __________________________________________________________
> > > _______________
> > > > We won't tell. Get more on shows you hate to
> > love
> > > > (and love to hate): Yahoo! TV's Guilty
> > Pleasures list.
> > > >http://tv.yahoo.com/collections/265
> > > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been
> > removed]
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been
> > removed]
> >
> >
>
>
>
>
>
____________________________________________________________________________________
> Sucker-punch spam with award-winning protection.
> Try the free Yahoo! Mail Beta.
>http://advision.webevents.yahoo.com/mailbeta/features_spam.html
>
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@...> wrote:
Ya gotta know you're in trouble when the word phonics starts with a p.
Who decided that "dyslexic" should be spelled like that, making it
hard for dyslexics? Maybe the same person who decided that "lisp"
should have an "s" in it.
Anyway, Krissie, you're in good company. Read a few of LF Herreshoff's
plans and you'll see he was dyslexic too.
Howard
hard for dyslexics? Maybe the same person who decided that "lisp"
should have an "s" in it.
Anyway, Krissie, you're in good company. Read a few of LF Herreshoff's
plans and you'll see he was dyslexic too.
Howard
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@> wrote:
>
I'll be honest spelling is not my best
> subject seeing how I'm dislexic,
We where all laughing at the joke and not at you. It is good to be
humble at times for when you can laugh at yourself you are in
controle. The other side is give everyone a bad time so no one feals
naglected.
Jon
humble at times for when you can laugh at yourself you are in
controle. The other side is give everyone a bad time so no one feals
naglected.
Jon
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@...> wrote:
>
> Ok blame the dyke out on the west coast. Yep she done,
> did it! Yep Yep. I need to thank you guys When I first
> looked at this I passed it off and then took the time
> to reread it and just laughed myself silly! Yes it was
> something I needed seeing how I was in the dumps at
> the time. I'll be honest spelling is not my best
> subject seeing how I'm dislexic, even with spell check
> I'm not always sure thinges are right. I will laugh
> right along with you when I make a mistake! For me
> life is far to short to be mad all the time like some
> in this world.
>
> Laughter is good for the heart and soul!
>
> Bright Blessings to you all!
> Krissie
Ok blame the dyke out on the west coast. Yep she done,
did it! Yep Yep. I need to thank you guys When I first
looked at this I passed it off and then took the time
to reread it and just laughed myself silly! Yes it was
something I needed seeing how I was in the dumps at
the time. I'll be honest spelling is not my best
subject seeing how I'm dislexic, even with spell check
I'm not always sure thinges are right. I will laugh
right along with you when I make a mistake! For me
life is far to short to be mad all the time like some
in this world.
Laughter is good for the heart and soul!
Bright Blessings to you all!
Krissie
--- derbyrm <derbyrm@...> wrote:
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html
did it! Yep Yep. I need to thank you guys When I first
looked at this I passed it off and then took the time
to reread it and just laughed myself silly! Yes it was
something I needed seeing how I was in the dumps at
the time. I'll be honest spelling is not my best
subject seeing how I'm dislexic, even with spell check
I'm not always sure thinges are right. I will laugh
right along with you when I make a mistake! For me
life is far to short to be mad all the time like some
in this world.
Laughter is good for the heart and soul!
Bright Blessings to you all!
Krissie
--- derbyrm <derbyrm@...> wrote:
> I was afraid I was going to start something.http://groups.yahoo.com/group/bolger7/files/Bonefish/
>
> Let's blame it on Krissie.
>
> Roger
>derbyrm@...
>http://home.insightbb.com/~derbyrm
>
> ----- Original Message -----
> From: devemaster1
> To:bolger@yahoogroups.com
> Sent: Monday, January 15, 2007 5:40 PM
> Subject: [bolger] Re: Help needed....
>
>
> And then-
>
> The boyfriend gave her a REAL jigsaw puzzle, a 100
> piece jobbie of a
> duckie and a horsie that said for 3 to 5 years,
> knowing full well that
> she would be thrilled when she solved it in only 2
> years.
>
> Sorry, couldn't resist.
>
> --- Inbolger@yahoogroups.com, "derbyrm"
> <derbyrm@...> wrote:
> >
> > I think she meant blonde, as in:
> >
> > A blonde calls her boyfriend and says, "Please
> come over here and
> help me. I have a killer jigsaw puzzle, and I
> can't figure out how to
> get it started."
> >
> > Her boyfriend asks, "What is it supposed to be
> when it's finished?"
> >
> > The blonde says, "According to the picture on
> the box, it's a tiger."
> >
> > Her boyfriend decides to go over and help with
> the puzzle. She lets
> him in and shows him where she has the puzzle
> spread all over the table.
> >
> > He studies the pieces for a moment, then looks
> at the box, then
> turns to her and says, "First of all, no matter
> what we do, we're not
> going to be able to assemble these pieces into
> anything resembling a
> tiger."
> >
> > He takes her hand and says, "Second, I want you
> to relax. Let's have
> a nice cup of tea, and then ..." he sighed ...
> > "Let's put all the Frosted Flakes back in the
> box......."
> >
> > Roger
> > derbyrm@...
> >http://home.insightbb.com/~derbyrm
> >
> > ----- Original Message -----
> > From: Peter Lenihan
> > To:bolger@yahoogroups.com
> > Sent: Saturday, January 13, 2007 3:14 AM
> > Subject: [bolger] Re: Help needed....
> >
> >
> > --- Inbolger@yahoogroups.com, Kristine Bennett
> <femmpaws@> wrote:
> >
> > Here ya go Kristine;
> >
> >
>
> >__________________________________________________________
> > Now,what the blazes is a "blond day".....we have
> sunny days,cloudy
> > days,rainy days,snowy days even grey days but
> blond?
> >
> > Sincerely,
> >
> > Peter Lenihan, having a cloudy/rainy day combo
> here along the shores
> > of the St.lawrence..........
> >
> > >
> > > Good Evening all I do hope your new year has
> got off
> > > to a good start.
> > >
> > > Now to my need... I know I had looked at a
> file for
> > > the Bonefish here and I can't find it again.
> Would
> > > someone know where it is at?
> > >
> > > Yes I'm having a blond day.
> > >
> > > Blessings to all
> > > Krissie
> > >
> > >
> > >
> > >
> >
>
> > ___________________________________________________________________________________________________
> > > We won't tell. Get more on shows you hate to
> love
> > > (and love to hate): Yahoo! TV's Guilty
> Pleasures list.
> > >http://tv.yahoo.com/collections/265
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been
> removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been
> removed]
>
>
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com/mailbeta/features_spam.html
I was afraid I was going to start something.
Let's blame it on Krissie.
Roger
derbyrm@...
http://home.insightbb.com/~derbyrm
Let's blame it on Krissie.
Roger
derbyrm@...
http://home.insightbb.com/~derbyrm
----- Original Message -----
From: devemaster1
To:bolger@yahoogroups.com
Sent: Monday, January 15, 2007 5:40 PM
Subject: [bolger] Re: Help needed....
And then-
The boyfriend gave her a REAL jigsaw puzzle, a 100 piece jobbie of a
duckie and a horsie that said for 3 to 5 years, knowing full well that
she would be thrilled when she solved it in only 2 years.
Sorry, couldn't resist.
--- Inbolger@yahoogroups.com, "derbyrm" <derbyrm@...> wrote:
>
> I think she meant blonde, as in:
>
> A blonde calls her boyfriend and says, "Please come over here and
help me. I have a killer jigsaw puzzle, and I can't figure out how to
get it started."
>
> Her boyfriend asks, "What is it supposed to be when it's finished?"
>
> The blonde says, "According to the picture on the box, it's a tiger."
>
> Her boyfriend decides to go over and help with the puzzle. She lets
him in and shows him where she has the puzzle spread all over the table.
>
> He studies the pieces for a moment, then looks at the box, then
turns to her and says, "First of all, no matter what we do, we're not
going to be able to assemble these pieces into anything resembling a
tiger."
>
> He takes her hand and says, "Second, I want you to relax. Let's have
a nice cup of tea, and then ..." he sighed ...
> "Let's put all the Frosted Flakes back in the box......."
>
> Roger
> derbyrm@...
>http://home.insightbb.com/~derbyrm
>
> ----- Original Message -----
> From: Peter Lenihan
> To:bolger@yahoogroups.com
> Sent: Saturday, January 13, 2007 3:14 AM
> Subject: [bolger] Re: Help needed....
>
>
> --- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@> wrote:
>
> Here ya go Kristine;
>
>http://groups.yahoo.com/group/bolger7/files/Bonefish/
>
> Now,what the blazes is a "blond day".....we have sunny days,cloudy
> days,rainy days,snowy days even grey days but blond?
>
> Sincerely,
>
> Peter Lenihan, having a cloudy/rainy day combo here along the shores
> of the St.lawrence..........
>
> >
> > Good Evening all I do hope your new year has got off
> > to a good start.
> >
> > Now to my need... I know I had looked at a file for
> > the Bonefish here and I can't find it again. Would
> > someone know where it is at?
> >
> > Yes I'm having a blond day.
> >
> > Blessings to all
> > Krissie
> >
> >
> >
> >
> __________________________________________________________
> _______________
> > We won't tell. Get more on shows you hate to love
> > (and love to hate): Yahoo! TV's Guilty Pleasures list.
> >http://tv.yahoo.com/collections/265
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]
And then-
The boyfriend gave her a REAL jigsaw puzzle, a 100 piece jobbie of a
duckie and a horsie that said for 3 to 5 years, knowing full well that
she would be thrilled when she solved it in only 2 years.
Sorry, couldn't resist.
The boyfriend gave her a REAL jigsaw puzzle, a 100 piece jobbie of a
duckie and a horsie that said for 3 to 5 years, knowing full well that
she would be thrilled when she solved it in only 2 years.
Sorry, couldn't resist.
--- Inbolger@yahoogroups.com, "derbyrm" <derbyrm@...> wrote:
>
> I think she meant blonde, as in:
>
> A blonde calls her boyfriend and says, "Please come over here and
help me. I have a killer jigsaw puzzle, and I can't figure out how to
get it started."
>
> Her boyfriend asks, "What is it supposed to be when it's finished?"
>
> The blonde says, "According to the picture on the box, it's a tiger."
>
> Her boyfriend decides to go over and help with the puzzle. She lets
him in and shows him where she has the puzzle spread all over the table.
>
> He studies the pieces for a moment, then looks at the box, then
turns to her and says, "First of all, no matter what we do, we're not
going to be able to assemble these pieces into anything resembling a
tiger."
>
> He takes her hand and says, "Second, I want you to relax. Let's have
a nice cup of tea, and then ..." he sighed ...
> "Let's put all the Frosted Flakes back in the box......."
>
> Roger
> derbyrm@...
>http://home.insightbb.com/~derbyrm
>
> ----- Original Message -----
> From: Peter Lenihan
> To:bolger@yahoogroups.com
> Sent: Saturday, January 13, 2007 3:14 AM
> Subject: [bolger] Re: Help needed....
>
>
> --- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@> wrote:
>
> Here ya go Kristine;
>
>http://groups.yahoo.com/group/bolger7/files/Bonefish/
>
> Now,what the blazes is a "blond day".....we have sunny days,cloudy
> days,rainy days,snowy days even grey days but blond?
>
> Sincerely,
>
> Peter Lenihan, having a cloudy/rainy day combo here along the shores
> of the St.lawrence..........
>
> >
> > Good Evening all I do hope your new year has got off
> > to a good start.
> >
> > Now to my need... I know I had looked at a file for
> > the Bonefish here and I can't find it again. Would
> > someone know where it is at?
> >
> > Yes I'm having a blond day.
> >
> > Blessings to all
> > Krissie
> >
> >
> >
> >
> __________________________________________________________
> _______________
> > We won't tell. Get more on shows you hate to love
> > (and love to hate): Yahoo! TV's Guilty Pleasures list.
> >http://tv.yahoo.com/collections/265
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
I think she meant blonde, as in:
A blonde calls her boyfriend and says, "Please come over here and help me. I have a killer jigsaw puzzle, and I can't figure out how to get it started."
Her boyfriend asks, "What is it supposed to be when it's finished?"
The blonde says, "According to the picture on the box, it's a tiger."
Her boyfriend decides to go over and help with the puzzle. She lets him in and shows him where she has the puzzle spread all over the table.
He studies the pieces for a moment, then looks at the box, then turns to her and says, "First of all, no matter what we do, we're not going to be able to assemble these pieces into anything resembling a tiger."
He takes her hand and says, "Second, I want you to relax. Let's have a nice cup of tea, and then ..." he sighed ...
"Let's put all the Frosted Flakes back in the box......."
Roger
derbyrm@...
http://home.insightbb.com/~derbyrm
A blonde calls her boyfriend and says, "Please come over here and help me. I have a killer jigsaw puzzle, and I can't figure out how to get it started."
Her boyfriend asks, "What is it supposed to be when it's finished?"
The blonde says, "According to the picture on the box, it's a tiger."
Her boyfriend decides to go over and help with the puzzle. She lets him in and shows him where she has the puzzle spread all over the table.
He studies the pieces for a moment, then looks at the box, then turns to her and says, "First of all, no matter what we do, we're not going to be able to assemble these pieces into anything resembling a tiger."
He takes her hand and says, "Second, I want you to relax. Let's have a nice cup of tea, and then ..." he sighed ...
"Let's put all the Frosted Flakes back in the box......."
Roger
derbyrm@...
http://home.insightbb.com/~derbyrm
----- Original Message -----
From: Peter Lenihan
To:bolger@yahoogroups.com
Sent: Saturday, January 13, 2007 3:14 AM
Subject: [bolger] Re: Help needed....
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@...> wrote:
Here ya go Kristine;
http://groups.yahoo.com/group/bolger7/files/Bonefish/
Now,what the blazes is a "blond day".....we have sunny days,cloudy
days,rainy days,snowy days even grey days but blond?
Sincerely,
Peter Lenihan, having a cloudy/rainy day combo here along the shores
of the St.lawrence..........
>
> Good Evening all I do hope your new year has got off
> to a good start.
>
> Now to my need... I know I had looked at a file for
> the Bonefish here and I can't find it again. Would
> someone know where it is at?
>
> Yes I'm having a blond day.
>
> Blessings to all
> Krissie
>
>
>
>
__________________________________________________________
_______________
> We won't tell. Get more on shows you hate to love
> (and love to hate): Yahoo! TV's Guilty Pleasures list.
>http://tv.yahoo.com/collections/265
>
[Non-text portions of this message have been removed]
--
Thought I'd chime in here well after the fact. I purchased my sails
for my Oldshoe from Duckworks. Very fair prices and kindly folks to
work with. I could have spent more than twice the price and got
highly finished sails, but what I got were very functional sails with
a full money back agreement if I'm unhappy with them and a reputation
that no sails have been returned. I can't tell you how they work, as
I'm still building my boat! I did a fair amount of research before
choosing Duckworks. I guess price and customer service are what sold
me. I have to keep reminding myself that I am not building a racing
machine, my boat will not be perfect and really, all that I am after
is a safe boat that I can relax and enjoy some easy lake sailing. I
would most certainly recommend Duckworks.
Fairwinds,
Dennis
(building an "Oldshoe" in Bellingham, WA)
- Inbolger@yahoogroups.com, "Bill" <kingw@...> wrote:
Thought I'd chime in here well after the fact. I purchased my sails
for my Oldshoe from Duckworks. Very fair prices and kindly folks to
work with. I could have spent more than twice the price and got
highly finished sails, but what I got were very functional sails with
a full money back agreement if I'm unhappy with them and a reputation
that no sails have been returned. I can't tell you how they work, as
I'm still building my boat! I did a fair amount of research before
choosing Duckworks. I guess price and customer service are what sold
me. I have to keep reminding myself that I am not building a racing
machine, my boat will not be perfect and really, all that I am after
is a safe boat that I can relax and enjoy some easy lake sailing. I
would most certainly recommend Duckworks.
Fairwinds,
Dennis
(building an "Oldshoe" in Bellingham, WA)
- Inbolger@yahoogroups.com, "Bill" <kingw@...> wrote:
>find a
> Hi all,
> I have pondered the advice of those who replied to my questions
> concerning sail lofts for my Long Micro. Thanks. I decided to
> further my search for lofts beyond the local area. I wanted to
> loft that had sewn sails for a sprit-boom rig before. I didn't havethat I
> to look far. My first stop was Gambell and Hunter, in Maine.
>http://www.gambellandhunter.com/contact.htm
> They are booked until July, which doesn't fit with my delusions
> will be launching early this summer. I looked at Dabbler Sails inwas
> Virginia.
>http://www.dabblersails.com/
> Stuart Hopkins (the owner) has sewn plenty of traditional sails,
> answered all my questions, and can probably get to my sails in late
> February or March. Perfect. He got my business, and his estimate
> the same as the other lofts.wrote:
>
> I'll keep everyone posted. Back to the epoxy and such.
>
> Bill, in Ohio
>
> --- Inbolger@yahoogroups.com, "Peter Lenihan" <peterlenihan@>
> >Designs,when
> > --- Inbolger@yahoogroups.com, "Bruce Hallman" <bruce@> wrote:
> > Hi Bruce(and Bill!),
> >
> > My folder with all the bills relating to the building of my
> > Micro is in deep storage and would take a while to dig out.
> > However,I had ordered my sails through Common Sense
> > Bernie Wolfard was at the helm and Brainbridge Sails(Brainbridgesource
> > Island?) for some reason keeps popping up in my memory as the
> > of the sails.still
> > Perhaps the best would be to contact Bernie( I think he
> > may be a member of this group) for exact details.relavent
> > In the meantime,I'll try and find time to head over to the
> > storage warehouse where my stuff is and try to extract the
> > file .......not an easy thing for a dis-organized clown likemyself:-)
> >work!
> > Congrats on getting a marina berth Bruce,and so close to
> >Francisco
> >
> > Sincerely,
> >
> > Peter Lenihan
> >
> >
> >
> > > Peter, can/would you name the loft you used?
> > >
> > > [Now, FINALLY, after three years on a wait list for a San
> > > marina berth I got the call, and can finally move 'Rose' fromher
> > > trailer to a downtown berth walking distance from my office.]
> > >
> > > {Back to the shop now, epoxy and chine tape on Topaz Spyder.}
>
To the Bolgerista seeking a sailmaker:
I have nearly completed a Folding Schooner. Have the sails, from
Dabbler Sails, Box 235, Wicomico Church, VA. 22579. Haven't had a
chance to test them yet, of course, but used to live on the Great
Wicomico River nearby, and owner/sailmaker Stuart Hopkins did some
rigging work for me several years ago. He specializes in four-cornered
sails, and has made a number for various Bolger designs. The sails he
made for my schooner look great. You might want to give him a call.
804-580-8723.
-- Will White
I have nearly completed a Folding Schooner. Have the sails, from
Dabbler Sails, Box 235, Wicomico Church, VA. 22579. Haven't had a
chance to test them yet, of course, but used to live on the Great
Wicomico River nearby, and owner/sailmaker Stuart Hopkins did some
rigging work for me several years ago. He specializes in four-cornered
sails, and has made a number for various Bolger designs. The sails he
made for my schooner look great. You might want to give him a call.
804-580-8723.
-- Will White
--- Inbolger@yahoogroups.com, "Bill" <kingw@...> wrote:
Hi Bill,
Good to hear that you have found a loft that fits your needs!
Nothing worse then being stuck with a finished boat ready to launch
with no sails.
Sorry I wasn't able to dig up the name of the sail loft I used
but THANK YOU for sparing me the task of rummaging through boxes and
boxes of "stuff" :-) Come to think of it, considering the age of the
purchase, whatever ever price I would have paid then would be totally
different today for you.
Continued success with your build and I'll keep my fingers and
toes crossed that your wish for an early summer launch comes true!
Sincerely,
Peter Lenihan, hoping for my own summer launch so that I can get back
to the fun business of drinking lots of ill gotten booty,some rapin'-n-
pillagin',terrorizing small river-side villages and all the other fun
pirate stuff there is to do,from along the shores of the mighty
St.Lawrence.............
> Hi all,
> I have pondered the advice of those who replied to my questions
> concerning sail lofts for my Long Micro. Thanks. I decided to
> further my search for lofts beyond the local area.
--- Inbolger@yahoogroups.com, Kristine Bennett <femmpaws@...> wrote:
Here ya go Kristine;
http://groups.yahoo.com/group/bolger7/files/Bonefish/
Now,what the blazes is a "blond day".....we have sunny days,cloudy
days,rainy days,snowy days even grey days but blond?
Sincerely,
Peter Lenihan, having a cloudy/rainy day combo here along the shores
of the St.lawrence..........
>
> Good Evening all I do hope your new year has got off
> to a good start.
>
> Now to my need... I know I had looked at a file for
> the Bonefish here and I can't find it again. Would
> someone know where it is at?
>
> Yes I'm having a blond day.
>
> Blessings to all
> Krissie
>
>
>
>
_____________________________________________________________________
_______________
> We won't tell. Get more on shows you hate to love
> (and love to hate): Yahoo! TV's Guilty Pleasures list.
>http://tv.yahoo.com/collections/265
>
Good Evening all I do hope your new year has got off
to a good start.
Now to my need... I know I had looked at a file for
the Bonefish here and I can't find it again. Would
someone know where it is at?
Yes I'm having a blond day.
Blessings to all
Krissie
____________________________________________________________________________________
We won't tell. Get more on shows you hate to love
(and love to hate): Yahoo! TV's Guilty Pleasures list.
http://tv.yahoo.com/collections/265
to a good start.
Now to my need... I know I had looked at a file for
the Bonefish here and I can't find it again. Would
someone know where it is at?
Yes I'm having a blond day.
Blessings to all
Krissie
____________________________________________________________________________________
We won't tell. Get more on shows you hate to love
(and love to hate): Yahoo! TV's Guilty Pleasures list.
http://tv.yahoo.com/collections/265
Hi all,
I have pondered the advice of those who replied to my questions
concerning sail lofts for my Long Micro. Thanks. I decided to
further my search for lofts beyond the local area. I wanted to find a
loft that had sewn sails for a sprit-boom rig before. I didn't have
to look far. My first stop was Gambell and Hunter, in Maine.
http://www.gambellandhunter.com/contact.htm
They are booked until July, which doesn't fit with my delusions that I
will be launching early this summer. I looked at Dabbler Sails in
Virginia.
http://www.dabblersails.com/
Stuart Hopkins (the owner) has sewn plenty of traditional sails,
answered all my questions, and can probably get to my sails in late
February or March. Perfect. He got my business, and his estimate was
the same as the other lofts.
I'll keep everyone posted. Back to the epoxy and such.
Bill, in Ohio
I have pondered the advice of those who replied to my questions
concerning sail lofts for my Long Micro. Thanks. I decided to
further my search for lofts beyond the local area. I wanted to find a
loft that had sewn sails for a sprit-boom rig before. I didn't have
to look far. My first stop was Gambell and Hunter, in Maine.
http://www.gambellandhunter.com/contact.htm
They are booked until July, which doesn't fit with my delusions that I
will be launching early this summer. I looked at Dabbler Sails in
Virginia.
http://www.dabblersails.com/
Stuart Hopkins (the owner) has sewn plenty of traditional sails,
answered all my questions, and can probably get to my sails in late
February or March. Perfect. He got my business, and his estimate was
the same as the other lofts.
I'll keep everyone posted. Back to the epoxy and such.
Bill, in Ohio
--- Inbolger@yahoogroups.com, "Peter Lenihan" <peterlenihan@...> wrote:
>
> --- Inbolger@yahoogroups.com, "Bruce Hallman" <bruce@> wrote:
> Hi Bruce(and Bill!),
>
> My folder with all the bills relating to the building of my
> Micro is in deep storage and would take a while to dig out.
> However,I had ordered my sails through Common Sense Designs,when
> Bernie Wolfard was at the helm and Brainbridge Sails(Brainbridge
> Island?) for some reason keeps popping up in my memory as the source
> of the sails.
> Perhaps the best would be to contact Bernie( I think he still
> may be a member of this group) for exact details.
> In the meantime,I'll try and find time to head over to the
> storage warehouse where my stuff is and try to extract the relavent
> file .......not an easy thing for a dis-organized clown like myself:-)
>
> Congrats on getting a marina berth Bruce,and so close to work!
>
>
> Sincerely,
>
> Peter Lenihan
>
>
>
> > Peter, can/would you name the loft you used?
> >
> > [Now, FINALLY, after three years on a wait list for a San Francisco
> > marina berth I got the call, and can finally move 'Rose' from her
> > trailer to a downtown berth walking distance from my office.]
> >
> > {Back to the shop now, epoxy and chine tape on Topaz Spyder.}
Sorry, wrong thread, should have been posted to the SHS thread
--- Inbolger@yahoogroups.com, "Steven DAntonio" <sdantonio93@...> wrote:
>
> For those looking for the design, Payson refers to it as the "single
> handed schooner" on his web site, I have in in one of Bolgers books
> (Boats with an Open Mind: Seventy-Five Unconventional Designs and
> Concepts (ISBN: 0070063761)), but it is listed there as "His and Her's
> Schooners".
>
> I don't suppose anyone would scan in the article for those of us who
> are not wooden boat subscribers?
>
> Steven
>
> --- Inbolger@yahoogroups.com, "Bill" <kingw@> wrote:
> >
> > Peter,
> > I too would love to know the name of your loft. And anyone else with
> > favorable experiences with lofts. I'm all ears.
> > Bill
> >
> > --- Inbolger@yahoogroups.com, "Bruce Hallman" <bruce@> wrote:
> > >
> > > On 1/5/07, Peter Lenihan <peterlenihan@> wrote:
> > >
> > > > so and was very very pleased despite having to order from the
> > > > American west coast
> > >
> > > Peter, can/would you name the loft you used?
> > >
> > > I am toying with the idea of getting a 'real' mainsail cut, to
replace
> > > my polytarp, for my Micro Navigator 'Rose'.
> > >
> > > [Now, FINALLY, after three years on a wait list for a San Francisco
> > > marina berth I got the call, and can finally move 'Rose' from her
> > > trailer to a downtown berth walking distance from my office.]
> > >
> > > {Back to the shop now, epoxy and chine tape on Topaz Spyder.}
> > >
> >
>
For those looking for the design, Payson refers to it as the "single
handed schooner" on his web site, I have in in one of Bolgers books
(Boats with an Open Mind: Seventy-Five Unconventional Designs and
Concepts (ISBN: 0070063761)), but it is listed there as "His and Her's
Schooners".
I don't suppose anyone would scan in the article for those of us who
are not wooden boat subscribers?
Steven
handed schooner" on his web site, I have in in one of Bolgers books
(Boats with an Open Mind: Seventy-Five Unconventional Designs and
Concepts (ISBN: 0070063761)), but it is listed there as "His and Her's
Schooners".
I don't suppose anyone would scan in the article for those of us who
are not wooden boat subscribers?
Steven
--- Inbolger@yahoogroups.com, "Bill" <kingw@...> wrote:
>
> Peter,
> I too would love to know the name of your loft. And anyone else with
> favorable experiences with lofts. I'm all ears.
> Bill
>
> --- Inbolger@yahoogroups.com, "Bruce Hallman" <bruce@> wrote:
> >
> > On 1/5/07, Peter Lenihan <peterlenihan@> wrote:
> >
> > > so and was very very pleased despite having to order from the
> > > American west coast
> >
> > Peter, can/would you name the loft you used?
> >
> > I am toying with the idea of getting a 'real' mainsail cut, to replace
> > my polytarp, for my Micro Navigator 'Rose'.
> >
> > [Now, FINALLY, after three years on a wait list for a San Francisco
> > marina berth I got the call, and can finally move 'Rose' from her
> > trailer to a downtown berth walking distance from my office.]
> >
> > {Back to the shop now, epoxy and chine tape on Topaz Spyder.}
> >
>
--- Inbolger@yahoogroups.com, "Bruce Hallman" <bruce@...> wrote:
Hi Bruce(and Bill!),
My folder with all the bills relating to the building of my
Micro is in deep storage and would take a while to dig out.
However,I had ordered my sails through Common Sense Designs,when
Bernie Wolfard was at the helm and Brainbridge Sails(Brainbridge
Island?) for some reason keeps popping up in my memory as the source
of the sails.
Perhaps the best would be to contact Bernie( I think he still
may be a member of this group) for exact details.
In the meantime,I'll try and find time to head over to the
storage warehouse where my stuff is and try to extract the relavent
file .......not an easy thing for a dis-organized clown like myself:-)
Congrats on getting a marina berth Bruce,and so close to work!
Sincerely,
Peter Lenihan
> Peter, can/would you name the loft you used?
>
> [Now, FINALLY, after three years on a wait list for a San Francisco
> marina berth I got the call, and can finally move 'Rose' from her
> trailer to a downtown berth walking distance from my office.]
>
> {Back to the shop now, epoxy and chine tape on Topaz Spyder.}
>
Peter,
I too would love to know the name of your loft. And anyone else with
favorable experiences with lofts. I'm all ears.
Bill
I too would love to know the name of your loft. And anyone else with
favorable experiences with lofts. I'm all ears.
Bill
--- Inbolger@yahoogroups.com, "Bruce Hallman" <bruce@...> wrote:
>
> On 1/5/07, Peter Lenihan <peterlenihan@...> wrote:
>
> > so and was very very pleased despite having to order from the
> > American west coast
>
> Peter, can/would you name the loft you used?
>
> I am toying with the idea of getting a 'real' mainsail cut, to replace
> my polytarp, for my Micro Navigator 'Rose'.
>
> [Now, FINALLY, after three years on a wait list for a San Francisco
> marina berth I got the call, and can finally move 'Rose' from her
> trailer to a downtown berth walking distance from my office.]
>
> {Back to the shop now, epoxy and chine tape on Topaz Spyder.}
>
On 1/5/07, Peter Lenihan <peterlenihan@...> wrote:
I am toying with the idea of getting a 'real' mainsail cut, to replace
my polytarp, for my Micro Navigator 'Rose'.
[Now, FINALLY, after three years on a wait list for a San Francisco
marina berth I got the call, and can finally move 'Rose' from her
trailer to a downtown berth walking distance from my office.]
{Back to the shop now, epoxy and chine tape on Topaz Spyder.}
> so and was very very pleased despite having to order from thePeter, can/would you name the loft you used?
> American west coast
I am toying with the idea of getting a 'real' mainsail cut, to replace
my polytarp, for my Micro Navigator 'Rose'.
[Now, FINALLY, after three years on a wait list for a San Francisco
marina berth I got the call, and can finally move 'Rose' from her
trailer to a downtown berth walking distance from my office.]
{Back to the shop now, epoxy and chine tape on Topaz Spyder.}
Bill -
1. the mast bend on a non-stayed rig helps to spill the air as
things heat up. You might pick up a degree or two to windward with a
well cut sail accounting for mast bend, but with the tip of the mast
falling off to leeward I doubt that you will gain more. On unstayed
dinghys used for racing, we always build the sails with the mast bend
measured. Long Micro is a cruiser...I doubt it's worth the effort.
2. don't put in the battens. they are only effective for driving
the boat off the wind. You will find the rig plenty powerful to get
to hull speed which is as fast as the boat is going to go
regardless. Battens are a pain in the butt when reefing and storing
the sail and increase maintenance costs.
I built a sail last year with no battens and did not notice a
signifant effect upwind, only downwind. But, the trade off was worth
it as reefing and storing is incredibly simple.
good luck with your project,
David Jost
1. the mast bend on a non-stayed rig helps to spill the air as
things heat up. You might pick up a degree or two to windward with a
well cut sail accounting for mast bend, but with the tip of the mast
falling off to leeward I doubt that you will gain more. On unstayed
dinghys used for racing, we always build the sails with the mast bend
measured. Long Micro is a cruiser...I doubt it's worth the effort.
2. don't put in the battens. they are only effective for driving
the boat off the wind. You will find the rig plenty powerful to get
to hull speed which is as fast as the boat is going to go
regardless. Battens are a pain in the butt when reefing and storing
the sail and increase maintenance costs.
I built a sail last year with no battens and did not notice a
signifant effect upwind, only downwind. But, the trade off was worth
it as reefing and storing is incredibly simple.
good luck with your project,
David Jost
--- Inbolger@yahoogroups.com, "Bill" <kingw@...> wrote:
Follow the sail plan,as per Bolger, and things will be just
fine.After all,how many rigs like this has He designed and had
built.Do not mess with success :-)
boom-vang on these types of sails and prevents the sprit-boom from
lifting! Tres important mon amie :-)
then drive.A nice stiff sheet of plywood would be just as effective
(but ugly).Think windvane :-)
are not truly familiar/experienced with these wonderful sails.I once
went through a similar run-around with a local sailmaker,asking the
same questions. I replied,"I don't know." Called Bolger and his
simple reply was,in essence...these rigs are so small and simple so
as not to need fancy cutting....suggest you find another loft. I did
so and was very very pleased despite having to order from the
American west coast despite a loft 15 minutes from home.....
will provide through tensioning the snotter.Keep your grog and
biscuits for friends and pirates :-)
Sincerely,
Peter Lenihan, lover of grog-n-biscuits, from along the shores of
the wet St.Lawrence.............
> Here are my questions:The
> 1. Both lofts suggested adding two or three battens to the main.
> picture of Andrew Pryor's LM (in the files section of this group,main.
> listed as "launched 2.") appears to show three battens in his
> The picture is small, but... What are your thought about battens?business.
> I had not considered them, but I am not in the sail making
Follow the sail plan,as per Bolger, and things will be just
fine.After all,how many rigs like this has He designed and had
built.Do not mess with success :-)
>I
> 2. The general consensus from past discussions in this group, what
> have read, and my experiences with my Gypsy sail is that the footof
> the sail should be cut straight. I attempted to add belly to myGypsy
> sail by cutting the foot in a curve. It was a disaster. Sostraigh
> cut on the foot. Period. Ja?Oui! A straight cut for the foot since this effectively acts as a
boom-vang on these types of sails and prevents the sprit-boom from
lifting! Tres important mon amie :-)
>Oui encore! Dead flat cut to this sail as it serves more for balance
> 3. The mizzens should be cut flat, or almost flat. Tightening the
> snotter should remove any belly from the mizzen. Overly "plump"
> mizzens cause troubles. Ja?
then drive.A nice stiff sheet of plywood would be just as effective
(but ugly).Think windvane :-)
>Beware of sailmakers ranting about mast bend etc... a sure sign they
> 4. Is there anything else I should be aware of?
are not truly familiar/experienced with these wonderful sails.I once
went through a similar run-around with a local sailmaker,asking the
same questions. I replied,"I don't know." Called Bolger and his
simple reply was,in essence...these rigs are so small and simple so
as not to need fancy cutting....suggest you find another loft. I did
so and was very very pleased despite having to order from the
American west coast despite a loft 15 minutes from home.....
>the
> 5. Besides their better price, my local sail loft will help tune
> sails once I am on the water. A nice perk although I will probablyThese "old fashion" sails do not need any tuning other then what you
> have to bribe them aboard with grog and hardtack.
will provide through tensioning the snotter.Keep your grog and
biscuits for friends and pirates :-)
Sincerely,
Peter Lenihan, lover of grog-n-biscuits, from along the shores of
the wet St.Lawrence.............
Trust Bolger. Cut the leach straight, no battens. Why complicate?
I wonder if either of your local lofts has ever made a LOM sail.
A deep reef in the main might be handy in a hard chance.
Joe Tribulato (Oldshoe)
I wonder if either of your local lofts has ever made a LOM sail.
A deep reef in the main might be handy in a hard chance.
Joe Tribulato (Oldshoe)
> 1. Both lofts suggested adding two or three battens to the main.
Hi all,
The time has come for me to get serious about outfitting my Long Micro
with a set of sails. I visited two local sail lofts today; one was
promising the other was not. The promising loft spent about .5 hour
talking with me about the boat. They requested that I measure the
amount of mast bend before they would make the sails. I viewed this
request favorably. Their written estimate beat both Sail Rite's
price, and Duckworks- by a couple hunderd dollars (see the quotes for
Sail Rite and Duckworks in file section of Bolger 6 or 7).
I searched the archives back a few years and gleaned some useful
advice from prior discussions of sprit-boom rigs.
Here are my questions:
1. Both lofts suggested adding two or three battens to the main. The
picture of Andrew Pryor's LM (in the files section of this group,
listed as "launched 2.") appears to show three battens in his main.
The picture is small, but... What are your thought about battens?
I had not considered them, but I am not in the sail making business.
2. The general consensus from past discussions in this group, what I
have read, and my experiences with my Gypsy sail is that the foot of
the sail should be cut straight. I attempted to add belly to my Gypsy
sail by cutting the foot in a curve. It was a disaster. So straigh
cut on the foot. Period. Ja?
3. The mizzens should be cut flat, or almost flat. Tightening the
snotter should remove any belly from the mizzen. Overly "plump"
mizzens cause troubles. Ja?
4. Is there anything else I should be aware of?
5. Besides their better price, my local sail loft will help tune the
sails once I am on the water. A nice perk although I will probably
have to bribe them aboard with grog and hardtack.
Bill, in Ohio
The time has come for me to get serious about outfitting my Long Micro
with a set of sails. I visited two local sail lofts today; one was
promising the other was not. The promising loft spent about .5 hour
talking with me about the boat. They requested that I measure the
amount of mast bend before they would make the sails. I viewed this
request favorably. Their written estimate beat both Sail Rite's
price, and Duckworks- by a couple hunderd dollars (see the quotes for
Sail Rite and Duckworks in file section of Bolger 6 or 7).
I searched the archives back a few years and gleaned some useful
advice from prior discussions of sprit-boom rigs.
Here are my questions:
1. Both lofts suggested adding two or three battens to the main. The
picture of Andrew Pryor's LM (in the files section of this group,
listed as "launched 2.") appears to show three battens in his main.
The picture is small, but... What are your thought about battens?
I had not considered them, but I am not in the sail making business.
2. The general consensus from past discussions in this group, what I
have read, and my experiences with my Gypsy sail is that the foot of
the sail should be cut straight. I attempted to add belly to my Gypsy
sail by cutting the foot in a curve. It was a disaster. So straigh
cut on the foot. Period. Ja?
3. The mizzens should be cut flat, or almost flat. Tightening the
snotter should remove any belly from the mizzen. Overly "plump"
mizzens cause troubles. Ja?
4. Is there anything else I should be aware of?
5. Besides their better price, my local sail loft will help tune the
sails once I am on the water. A nice perk although I will probably
have to bribe them aboard with grog and hardtack.
Bill, in Ohio