Re: [bolger] Half Model of Massachusetts 28ft Inshore Lobsterboat

Nice half model, the Tyson family are 3/4 complete of the full size thing, The decks have been dynal and expoxy coated and now for the cabin and deck-house. Launching should be early 2008.

graeme19121984 <graeme19121984@...> wrote: ""Laura b"
My very first attempt at half-hull modelling, this Gloucester,
Massachusetts 28ft Inshore Lobsterboat was designed by Phil Bolger with
an attractive sheer and good flair in the bows. A very pretty hull for
a motorboat. Unlike my other hulls, this model was carved from a
laminated set of "lifts" or waterlines as normally seen on the plans.
Timber used is Silky Oak (Grevillea robusta) for the board and Rose She-
oak (Casuarina torulosa) for the hull."

http://www.sutcliffegallery.com.au/gen/Lobsterbig.jpg






---------------------------------
Don't let your dream ride pass you by. Make it a reality with Yahoo! Autos.

[Non-text portions of this message have been removed]

""Laura b"
My very first attempt at half-hull modelling, this Gloucester,
Massachusetts 28ft Inshore Lobsterboat was designed by Phil Bolger with
an attractive sheer and good flair in the bows. A very pretty hull for
a motorboat. Unlike my other hulls, this model was carved from a
laminated set of "lifts" or waterlines as normally seen on the plans.
Timber used is Silky Oak (Grevillea robusta) for the board and Rose She-
oak (Casuarina torulosa) for the hull."

http://www.sutcliffegallery.com.au/gen/Lobsterbig.jpg