Re: Bolger keel

Mark
Thankyou
What is " gregs hulls"?

Jeffery

--- Inbolger@egroups.com, Mark Albanese <marka@o...> wrote:
> freedem@e... wrote:
> Jeff:
>
> You are asking about the Box / Step keel aren't you? These are
mostly on
> the order of about 5:1 length / beam ratio.
> In all the motorboats they seem quite deep at the bow, and run out
to about
> half the depth or less behind.
>
> In addition to PCB's published drawings, there are a couple of
these
to
> look at in Greg's Hulls. "Don't design a boat to leave your home
without it."
>
> Mark
> >
> > Don't know if this is quite kosher to ask but how does one design
a
> > bolger keel what are the paramiters of the width of keel to beam
ect
> > In Homage to Mr Bolger
> > Jeffery W Bybee
> >
> > Bolger rules!!!
> > - no cursing
> > - stay on topic
> > - use punctuation
> > - add your comments at the TOP and SIGN your posts
> > - add some content: send "thanks!" and "ditto!" posts off

freedem@...wrote:
Jeff:

You are asking about the Box / Step keel aren't you? These are mostly on
the order of about 5:1 length / beam ratio.
In all the motorboats they seem quite deep at the bow, and run out to about
half the depth or less behind.

In addition to PCB's published drawings, there are a couple of these to
look at in Greg's Hulls. "Don't design a boat to leave your home without it."

Mark

>
> Don't know if this is quite kosher to ask but how does one design a
> bolger keel what are the paramiters of the width of keel to beam ect
> In Homage to Mr Bolger
> Jeffery W Bybee
>
> Bolger rules!!!
> - no cursing
> - stay on topic
> - use punctuation
> - add your comments at the TOP and SIGN your posts
> - add some content: send "thanks!" and "ditto!" posts off-list.