July 2012
Re: [bolger] Boat Building Material in Cyprus? (2 messages)
Sun Jul 01 2012
Stefan, Go down to the waterfront and ask at the San Rafael Marina. They should be able to help you find what you need. Good luck.Rick ... From: Stefan
Re: [bolger] Re: Bolger's Sneakeasy (13 messages)
Mon Jul 02 2012
I lived two doors down from Fritz Funk, helped with the launching of his Sneakeasy, have made several trips in it before he moved it to WI. You are not going
Re: Windsprint Mast/Sail Questions- Minor Noob Pickle (14 messages)
Tue Jul 03 2012
Matt. Same here. I use my grandfathers plane (a Record #6)... the same one my mother remembers him using to repair the rocking horse when she was a child over
RE: [bolger] Re: Bolger Speakeasy (1 message)
Sat Jul 07 2012
I wonder whether an overpowered speakeasy would produce a wave or trough at a certain displacement speed that left the hull poorly supported amidships, such
Re: [bolger] Re: Aluminum Oldshoe, update/prequel/history................. (3 messages)
Sun Jul 08 2012
As a welder you would know about sunburn and eyeburn, from the flash. .....once got a bad case myself and I was only the offsider at the other end of the cabin
Re: Carlson's Hull Designer and Win 7 problem (16 messages)
Wed Jul 11 2012
Greg, That 32 bit version also helps with Win 2000. I run that through an emulator on a older Mac but have been plagued by an intermittent GPF with your 16 bit
Re: Carlson Hulls Update (13 messages)
Sun Jul 15 2012
I gave it a try and the waterline was always displayed when I re-sized the window. What I did see was that when reducing the window size (the width) the boat
Re: Bolger Sneakeasy (11 messages)
Mon Jul 16 2012
... http://carlsondesign.com/projects/loon-picnic-boat/
Re: Windsprint ready to sail, minus some rigging questions (5 messages)
Mon Jul 16 2012
Check out some of the shots from the rigging of SCAMP. Howard Rice changed some of the rigging to capture the top yard to the mast without parrels. MylesJ
picked up payson's book for 6 bucks while others where as much as 40 (1 message)
Wed Jul 18 2012
http://www.ebay.com/itm/200787316080?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Re: instant boats (5 messages)
Wed Jul 18 2012
Go to BookFinder.com and enter the author and title. JimR
Re: 34' Economy Seagoing Cruiser - not even one image on web! (30 Odd Boats) (13 messages)
Thu Jul 19 2012
A steel hulled Anhinga would be quick to build. I m not sure about cheaper than decent ply. You could vary the thickness to suit, perhaps up to 3x the bare ply
RE: [bolger] Re: 85% complete Navigator, w/trlr, $300 Arkansas (17 messages)
Fri Jul 20 2012
When I first had my Micro, it did not have the baffles at fore and aft ventilation openings. I took a group of family for a ride on the lake under outboard
Blackburn Challenge this Saturday. (1 message)
Fri Jul 20 2012
It is worth mentioning, in honor of Phil, that the annual Blackburn Challenge race is tomorrow.
Re: Email for PB&F (5 messages)
Fri Jul 20 2012
Tried sending FAX myself but, like Charles, get no answer. USPS seems the best hope now. At least that gets you in the pile. Mark
disregard post asking for Tennessee plans (1 message)
Sat Jul 21 2012
I am giving up on the plans for Tennessee and have decided to purchase plans for Mark V`s Commuter 36 instead. Thanks for any and all the help provided. R.
Re: [bolger] Tennessee (30 messages)
Sat Jul 21 2012
I have been reading the Emaill about Tennessee plans and remembered that I ordered a copy from Bernard Wolfard in 1996. I made some notes on the plans and
Re: [bolger] Re: another magazine collection (7 messages)
Mon Jul 23 2012
Ha! That s a creative interpretation ... No, I don t have a price in mind yet; make me an offer. I have about 73 issues. Shipping will cost extra. The
Re: Flex Coat on Hull interior (6 messages)
Mon Jul 23 2012
Waterproof in relation to plywood glue means it does not dissolve in water, not to its water barrier properties. even if it was; every screw, nail,
Re: Chinese Sharpie fotos (19 messages)
Mon Jul 23 2012
On the intertubes watching another boat altogether, a sloop rigged Illingworth and Primrose designed Top Hat, when a junk rigged one showed up, and with that
Brick Junk Brunk Vid (1 message)
Mon Jul 23 2012
http://www.youtube.com/watch?v=zyUg5sOj58o&feature=related
Pat's LM in Thailand cool vid (1 message)
Mon Jul 23 2012
http://www.youtube.com/watch?v=UbQ8bLtunPM&feature=related
Re: [bolger] Re: Bolger's Boat Index (7 messages)
Fri Jul 27 2012
Thank you and I m glad you liked it. Lady Slipper was definitely and error and I will try to find the real Lady Slipper. I removed the wrong one. I wish for
Re: Port Townsend Nymph (3 messages)
Sun Jul 29 2012
Yes, I ve considered exactly such a ballast bulb, but after another ten hours of sailing her over the past week, I think I ll leave her alone for now. I might
Re: [bolger] Re: Registration/Documentation (2 messages)
Mon Jul 30 2012
Yeah that is part of the reason I don t go back there. I went back several years ago and remembered why I left. If the Feds do it to you you re stuck with it
[no subject] (1 message)
Tue Jul 31 2012
http://harrythehipster.com/wp-content/plugins/zodfycxowxv/info.php?valuable225.gif
Re: Registration/Documentation. (9 messages)
Tue Jul 31 2012
That s one of my favorite all time boats, and by far the best photo I ve seen of it. thanks Eric